300 Series Low Profile Conveyor
Precision indexing tolerance to register a part to within
+/- .015" without sensors.
High speeds up to 2000 fpm with ramp up/down capacity.
Custom molded cleats to integrate perfectly with your part or application.
Cleats are high frequency welded to the belt.
Positive, non-slip timing pulleys.
Self-aligning drive bearings with seals.
Bearings can be lubricated rapidly, without drive removal.
Stepper motors and Servo drives are PLC programmable.
Optional self-tracking V-guide is thermally welded to the carcass of the belt.
Nylon coated belt carcass to reduce friction and minimize noise.
Ability to run multiple bands of belting on one conveyor.
Timing belts are steel or Kevlar reinforced to offer high load carrying capacities, reduce stretch and allow for precision cleat or profile placement.
Low profile conveyor—only 3" high.
Less than 5-minute belt change without removal of drive package or guide rails.
Widths up to 18" and lengths up to 24' (Special widths and lengths available).
Heavy duty load carrying capacities.*
High impact resistant single piece formed powder coated
10 gauge steel frame.
Wide variety of application specific belting.
Wide variety of Sides, Guides, Mounts, Stands, Drive Packages and Controls.