EMAIL:
SALES
GREG
MIKE
DAVID
BRYAN
PHONE:
972-323-0797
FAX:
972-323-0785
|
|
Index>Home>Gravity>Ball Transfer Table |
Ball Transfer (Model b) |
|
|
|
For replacement ball assemblies, refer to part #BRW04650 |
|
SPECIFICATIONS |
BALL ASSEMBLIES: 1" dia. steel ball x 1-13/16" overall housing diameter. Mounting bolt is 1/4"-20.
BALL CAPACITY: 50 lbs. per ball with max. unit load not to exceed the capacity of 4 balls (200#).
FRAMES: 3-1/2" x 1-1/2" x 10 ga. steel with balls in set high position (1/4" above side frames) only. |
|
FRAME CAPACITY: 1300 lbs. maximum distributed live load per 10' section with supports at 10' ctrs; 3200 lbs. at 5' ctrs.
PLATES: Balls are attached in square
pattern to 10 ga. formed plates up to 39" BF. Above 39", plates are 7 ga.
COUPLINGS: Butt type. |
24 Hour Shipments
Include All 1-Foot Increments
1'- 0" TO 10'- 0"
On Ball Transfers |
|
WARNING
To prevent pinch points that exist when gravity conveyors are permanently attached to power conveyors, use connector brackets with safety pop-out rollers. |
|
|
|
|