EMAIL:
SALES
GREG
MIKE
DAVID
BRYAN


PHONE:
972-323-0797

FAX:
972-323-0785

   
Index>Home>Gravity>Light Duty Gravity>138A/138G

 

138a Aluminum Gravity Roller Conveyor
138g Galvanized Roller Gravity Conveyor
Ball Transfer Units
     

Double roller curves
(24" OAW models only)


Single roller curves
(12" & 18" OAW models only)

Download catalog page in pdf format

SPECIFICATIONS
ROLLERS: 1-3/8" dia. x 18 ga. tubing available in heat treated alum. (model 138A) or galv. steel (model 138G); both with smooth swaged ends. Roller capacity is 35 lbs. for 138A; 50 lbs. for 138G.

AXLES: 1/4" dia. galvanized steel shaft, spring loaded.

FRAMES: Formed heat treated aluminum channel 2-1/2" x 1" x 1/8"; formed galvanized steel channel 2-1/2" x 1" x 12 ga.		 COUPLINGS: Hook and rod; hooks on one end and rod ("stud") other end. 

BEARINGS: Integral plain ball bearings, zinc plated, oiled.

FRAME CAPACITY: Aluminum 160 lbs. max. distributed live load per 10' section or 750 lbs. per 5' section; galv. steel 350 lbs. max. distributed live load per 10' section, or 1300 lbs. per 5' section.
24 Hour Shipments 
Include All 1-Foot Increments
 1'- 0" TO 10'- 0"
On Straight Sections 		WARNING
To prevent pinch points that exist when gravity conveyors are permanently attached to power conveyors, use connector brackets with safety pop-out rollers.