EMAIL:
SALES
GREG
MIKE
DAVID
BRYAN


PHONE:
972-323-0797

FAX:
972-323-0785

   
Index>Home>Gravity>Medium Duty Gravity>192S


192S 1.9" x 12 Ga.
Steel Roller Gravity Conveyer
     


Single Roller Design


Double Roller Model

Download catalog page in pdf format

SPECIFICATIONS
ROLLERS: 1.9" x 12 ga. steel tubing, model 192S, with smooth swaged ends.

FRAMES: Formed steel painted channel  3-1/2" x 1-1/2" x 10 ga. set high; 4-1/2" x 1-1/2" x 10 ga. set low.

ROLLER CAPACITY: 260 lbs. per roller.

FRAME CAPACITY: 1300 lbs. maximum distributed live load per 10' section with supports at 10' centers; 3200 lbs. at 5' centers.

BEARINGS: Integral plain ball bearings, zinc plated, grease packed.

COUPLINGS: Butt type.

AXLES: 7/16" hex shaft, spring loaded.

OPTIONAL FRAME: 4" @ 5.4 lbs. struc. steel channel frame, rollers 3/16" high, may vary due to structural tolerances.

 24 Hour Shipments 
Include All 1-Foot Increments
 1'- 0" TO 10'- 0"
On Straight Sections
WARNING
To prevent pinch points that exist when gravity conveyors are permanently attached to power conveyors, use connector brackets with safety pop-out rollers.