EMAIL:
SALES
GREG
MIKE
DAVID
BRYAN


PHONE:
972-323-0797

FAX:
972-323-0785

   
Index>Home>Gravity>Medium Duty Gravity>199S


199S 1.9" x 9 Ga.
Steel Gravity Roller Conveyer
     


Single Roller Design


Double Roller Model

Download catalog page in pdf format

SPECIFICATIONS

ROLLERS: 1.9" x 16 ga. steel tubing,model 196S,with smooth swaged ends.

FRAMES: Formed steel painted channel 3-1/2" x 1-1/2" x 10 ga. set high; 4-1/2" x 1-1/2" x 10 ga. set low.

BEARINGS: Integral plain ball bearings,zinc plated, grease packed.

FRAME CAPACITY: 250 lbs. per roller,or 1300 lbs. maximum distributed live load per10' section with supports at 10' centers;3200 lbs. at 5' centers.

COUPLINGS: Butt type.

AXLES: 7/16" hex shaft, spring loaded.

OPTIONAL FRAME: 4" @ 5.4 lbs. struc. steel channel frame, rollers 3/16" high, may vary due to structural tolerances.

 24 Hour Shipments 
Include All 1-Foot Increments
 1'- 0" TO 10'- 0"
On Straight Sections
WARNING
To prevent pinch points that exist when gravity conveyors are permanently attached to power conveyors, use connector brackets with safety pop-out rollers.