SLAT: 5-3/4" wide formed 7 ga. steel channel.

DRIVE: End side mount drive.

SPEED: 35 FPM, constant (maximum).

TAKE-UP: Screw type.

BED: 19-3/4" deep formed steel channel.

FLOOR SUPPORTS: Supports for elevations of 20" to 26-1/4" will be fixed height supports. Above 26-1/4", standard SH supports will be used.

MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

ROLLER CHAIN: Chain sizes will vary with length of conveyor.

ELECTRICAL CONTROLS: Optional.