BELTING: Series 900 flat friction top gray polypropylene belt with black rubber top modules.
DRIVE SPROCKETS: 6.1" pitch dia. with 1.5" square bore. Available with OPTIONAL 6.1" pitch dia. with 2.5" square bore and 6.8" pitch dia. sprockets with 1.5" or 2.5" square bore.
TAIL SPROCKETS: 6.1" pitch dia. with 1.5" square bore. Available with OPTIONAL 6.1" pitch dia. with 2.5" square bore and 6.8" pitch dia. sprockets with 1.5" or 2.5" square bore.
END DRIVE: Allows one-direction (unit) operation.
BELT SPEED: 60 FPM, constant.
TAKE-UP: Catenary type located at discharge end.
|
RETURN ROLLERS: 1.9" dia. x 16 ga. steel, model 196S, adjustable with rubber sleeves.
BED: 7" x 1-1/2" x 10 ga. channel frame with open style bed construction and UHMW wearstrips mounted to longitudinal channels.
BEARINGS: Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
ROLLER CHAIN: Drive shaft is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
FLOOR SUPPORTS: Optional.
ELECTRICAL CONTROLS: Optional.
|