BELTING: Series 900 flat top gray polypropylene belt with 2" high streamline flights on 11.9" centers, FDA approved belting.

DRIVE SPROCKETS: 4.1" pitch dia. with 1.5" square bore.

TAIL SPROCKETS: 4.1" pitch dia. with 1.5" square bore.

END DRIVE: Allows one-direction (unit) operation.

TAKE-UP: Catenary type, underneath mounted.

BEARINGS: Drive shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.

BELT SPEED: 35 FPM, constant.

BED: 8" deep x 10 ga. enclosed box type construction with UHMW wearstrips mounted to 14 ga. steel belt return pan.

INCLINE: 30, 36 and 45 degree (specify).

PORTABLE SUPPORT: Adjustable floor supports with 4" dia. casters & bracing.

ROLLER CHAIN: No. 50 chain provided at drive shaft. Chain take-up provided on motor base.

MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

ELECTRICAL CONTROLS: Optional.