TREAD ROLLERS: 2.5 " dia. x 11 ga., model 251S.
CHAIN DRIVE: Roller-to-roller No. 40 roller chain. Zone-to-zone No. 60 roller chain.
CHAIN GUARD: All chains are completely enclosed along the entire length of conveyor.
CENTER DRIVE: Drive either side mounted or underside mounted (specify). Drive shafts are supported by precision, heavy duty, lubricated, ball bearing units.
ROLLER CENTERS: 4" or 6" RC ONLY.
SPEED: 35 FPM, constant.
ACCUMULATION ZONE: 5'-0" zone lengths, zone singulation operation, photo electric sensor controlled zones with air clutch (60 psi max).
BED: 7-1/2" x 1-1/2" x 7 ga. and 5 " x 1-1/2" x 7 ga. formed steel channel frame. Bed sections are bolted together with butt couplings and floor supports.
FLOOR SUPPORTS: Optional.
BEARINGS: Removable type, heavy duty ball bearings, zinc-plated, grease packed, labyrinth seal.
FRL: Unit is provided with filter, regulator and lubricator with 3/8" ports for 60 PSI operational pressure.
MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
CAPACITY: 1000 lbs./ft. up to a maximum of 3000 lb. pallet load.
ELECTRICAL CONTROLS: Optional