TRANSFER ARM: 10 ga. formed channel.

TRANSFER BELT: "B" section V-belt.

STANDARD LENGTHS: 3', 4', 5', 6', 7' and 8' unit lengths.

V-BELT CENTERS: 18"

CENTER DRIVE: Allows reversible unit operation.

LIFT: Positive type.

BEARINGS: Heavy duty, lubricated, ball bearing unit with cast iron housings.

BELT SPEED: 35 FPM constant.

MOTOR DRIVE: 1/2 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

FLOOR SUPPORTS: Integral part of unit, with adjustment of 18" to 20" top of V-belt (down position).

CAPACITY: Unit load not to exceed 500 lbs.

ELECTRICAL CONTROLS: Optional.