ROLLERS: 2-1/2" x 14 ga. steel tubing, model 254S, with smooth swaged ends.
FRAMES: Formed steel painted channel
3-1/2" x 1-1/2" x 10 ga. set high;
4-1/2" x 1-1/2" x 10 ga. set low.
ROLLER CAPACITY: 290 lbs. per roller.
BEARINGS: Integral plain ball bearings, zinc plated, grease packed. |
|
FRAME CAPACITY: 1300 lbs. maximum distributed live load per 10' section with supports at 10' centers; 3200 lbs. at 5' centers.
COUPLINGS: Butt type.
AXLES: 7/16" hex shaft, spring loaded.
OPTIONAL FRAME: For structural steel channel frame, see 254S Structural page. |
