FRAME: 7 ga. formed channel.

TRANSFER CHAIN: No. 80 (model CD380) or no. 60 (model CD360) riveted roller chain.

STANDARD LENGTHS: 3', 4', 5' 6', 7' and 8' unit lengths.

CHAIN CENTERS: 18"

CHAIN TAKE-UP: Screw type.

END DRIVE: Allows one-direction (unit) operation; add optional center drive for reversible application.

LIFT: Pivot type.

CHAIN SPEED: 35 FPM constant.

BEARINGS: Heavy duty, lubricated, ball bearing unit with cast iron housings.

CAPACITY: Unit load not to exceed 
4000 lbs.

FLOOR SUPPORTS: Integral part of unit.

MOTOR DRIVE: 1/2 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

AIR CONTROLS: Air chambers with single solenoid valve.

CUTOUTS: Required through conveyor.

ELECTRICAL CONTROLS: Optional.